Module No. 3539

Other Settings

This section explains other watch settings you can configure.

Changing the Date Display Format

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Hold down (A) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.

    3. 3539_fl_HT_SET_comon

  3. Press (C) nine times.

    4. This displays a screen for selecting the date display format.

  4. Press (D) to select a date display format.

    5. [M.DD]: Month, day

    [DD.M]: Day, month

    3539_41_Other

  5. Press (A) to exit the setting screen.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

Specifying the Day of the Week Language

You can select any one of six languages for the day of the week display in the Timekeeping Mode.

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Hold down (A) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.

    3. 3539_fl_HT_SET_comon

  3. Press (C) 10 times.

    4. This causes the language setting to flash.

    3539_42_Other

  4. Use (D) to select a language.

    5. [ENG]: English
    [ESP]: Spanish
    [FRA]: French
    [DEU]: German
    [ITA]: Italian
    [PyC]: Russian

  5. Press (A) to exit the setting screen.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

Enabling the Button Operation Tone

Use the procedure below to enable or disable the tone that sounds when you press a button.

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Hold down (A) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.

    3. 3539_fl_HT_SET_comon

  3. Press (C) 11 times.

    4. This causes [KEY♪] or [MUTE] to flash on the display.

    3539_43_Other

  4. Press (D) to select [KEY♪] or [MUTE].

    5. [KEY♪]: Operation tone enabled.

    [MUTE]: Operation tone muted.

    3539_44_fl_Other

  5. Press (A) to exit the setting screen.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

Note that alarm and timer tones will still sound even while the operation tone is muted.

Configuring Power Saving Function Settings

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Hold down (A) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.

    3. 3539_fl_HT_SET_comon

  3. Press (C) 14 times.

    4. This displays [POWER SAVING].

    3539_45_Other

  4. Press (D) to toggle between on and off.

    5. [On]: Power Saving enabled.

    [OFF]: Power Saving disabled.

  5. Press (A) to exit the setting screen.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

For details about Power Saving, refer to the information below.

Power Saving Function

Resetting Watch Settings

This section explains how to return the watch settings below to their initial factory defaults.

Watch Settings

Reminder

Stopwatch

Timer

Alarm

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Hold down (A) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.

    3. 3539_fl_HT_SET_comon

  3. Press (C) twice.

    4. This causes the seconds to flash.

    3539_46_Other

  4. Hold down (B) for at least seven seconds. Release the button when [ALL] stops flashing.

    5. 3539_47_Other

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

Resetting the watch will also delete information for pairing the watch with a phone, and unpair them.

Back

Next