Module No. 3464

Setting the Timer Start Time

The start time can be set in 1-second units up to 60 minutes.

  • If a timer countdown operation is in progress, reset the timer to its current start time before performing this operation.

1.Hold down (A) for at least two seconds. Release the button when the number of auto repeats setting (01 to 20) starts to flash.

3464_35_TMR_comon

2.Use (D) and (E) to specify the number of auto repeats.

3.Press (C).

4.Use (D) and (E) to display [1].

3464_36_TMR

5.Press (C).

This causes the minutes digits to flash.

6.Use (D) and (E) to change the timer minutes setting.

3464_37_TMR

7.Press (C).

This causes the seconds digits to flash.

8.Use (D) and (E) to change the timer seconds setting.

3464_38_TMR

9.Press (A) to exit the setting screen.