The timer counts down from a start time specified by you. A beeper sounds when the end of the countdown is reached.

The beeper is muted when battery power is low.

Using CASIO WATCHES to Configure Timer Settings

If the watch is paired with a phone, you can also use the CASIO WATCHES phone app to set the timer start time.

Setting the Countdown Start Time

The start time can be set in 1-second units up to 60 minutes.

If a timer countdown operation is in progress, reset the timer to its current start time before performing this operation.

1. Enter the Timer Mode.

Navigating Between Modes

2. Hold down (A) for at least two seconds. Release the button when the minutes setting starts to flash.

This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators.



3. Use (B) and (D) to change the minutes setting.

Holding down (B) or (D) scrolls through settings at high speed.

4. Press (C).

This causes the seconds digits to flash.



5. Use (B) and (D) to change the seconds setting.

6. Press (A) to exit the setting screen.

Using the Timer

1. Enter the Timer Mode.

Navigating Between Modes


2. Use the operations below to perform a timer operation.



A beeper sounds for 10 seconds to let you know when the end of a countdown is reached.

You can reset a paused countdown to its start time, by pressing (A).

3. Press any button to stop the tone.

Timer Countdown Indication

30 minutes before the end of a timer operation is reached, a countdown start tone sounds and the function hand starts to indicate the remaining time until the end of the timer operation.

The countdown start tone will not sound when the timer start time is 30 minutes or less.