Module No. 5708
Enabling or Disabling the Schedule Timer Notification Sound
Use the procedure below to enable or disable the schedule timer notification sound.
-
Enter the Timekeeping Mode.
-
Hold down (B) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.
-
Press (C) 11 times.
-
Use (D) to select [BEEP] or [OFF].
-
Press (B) to complete the setting operation.
This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators.
![5708_fl_SET_HT_caps](fig/5708_fl_SET_HT_UQIDILntlfomen.png)
This causes [BEEP] or [OFF] to flash on the display.
![5708_51_Other](fig/5708_51_Other_UQIDILwfjeijys.png)
[BEEP]: Beep enabled.
[OFF]: Beep disabled.
![5708_52_Other](fig/5708_52_Other_UQIDILekbeiswo.png)
Note
While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.