Module No. 5708
Enabling the Button Operation Tone
Use the procedure below to enable or disable the tone that sounds when you press a button.
-
Enter the Timekeeping Mode.
-
Hold down (B) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.
-
Press (C) 12 times.
-
Press (D) to select [KEY♪] or [MUTE].
-
Press (B) to complete the setting operation.
This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators.
![5708_fl_SET_HT_caps](fig/5708_fl_SET_HT_UQIDILntlfomen.png)
This causes [KEY♪] or [MUTE] to flash on the display.
![5708_53_Other](fig/5708_53_Other_UQIDILwtydforg.png)
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
![5708_54_Other](fig/5708_54_Other_UQIDILncpedjhl.png)
Note
While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.
Note that alarm and timer tones will still sound even while the operation tone is muted.