Module No. 5708

Resetting Watch Settings

This section explains how to return the watch settings below to their initial factory defaults.

Watch Settings

Stopwatch

Timer

Alarm

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Hold down (B) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.

    3. This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators.

    5708_fl_SET_HT_caps

  3. Press (C) three times.

    4. This causes the seconds to flash.

    5708_19_comon

  4. Hold down (A) for at least five seconds. Release the button when [RESET] stops flashing.

    5. 5708_55_Other

  5. Press (B) to complete the setting operation.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

Resetting the watch will also delete information for pairing the watch with a phone, and unpair them.

Back

Next