Module No. 5672

Using Watch Operations to Adjust the Time Setting

If your watch cannot connect with a phone for some reason, you can use watch operations to adjust date and time settings.

Selecting Your Home City’s Time Zone

Use the procedure in this section to select the time zone of the city you want to use as your Home City.

Important!

If you do not specify the time zone where you are using the watch, the current time setting will not be correct after it is adjusted based on a time calibration signal.

  1. Loosen the crown and then pull it out to the second click.

    2. The second hand indicates the currently selected time zone, while the mode hand indicates the current summer time setting.

    The time zone is indicated as a time offset. ±0 hours is indicated when the second hand is at 12 o’clock, with other offsets indicated when it is to the left and right of 12 o’clock. For information about time zone positions, go to the section below.

    City (Time Zone) Table

    Tokyo (+9 offset)

    5672_caps_9_TMzone

  2. Rotate the crown to change the time zone.

  3. Push the crown back in and then lock it.

Adjusting the Time and Day Setting

  1. Loosen the crown and then pull it out to the second click.

    2. The second hand will point to the currently selected time zone.

    The mode hand will point to the summer time setting for the currently selected Home City.

    5672_TMzone

  2. Hold down (C) for at least one second.

    3. This causes the second hand to move to 12 o’clock, and enables the hour and minute setting operation.

  3. Rotate the crown to change the hour and minute settings.

  4. Press (C).

    5. This enables the year ten’s digit setting operation.

  5. Rotate the crown to move the second hand to the desired setting for the year ten’s digit.

    6. 5672_15_ATDS

  6. Press (C).

    7. This enables the year one’s digit setting operation.

  7. Rotate the crown to move the second hand to the desired setting for the year one’s digit.

    8. 5672_16_ATDS

  8. Press (C).

    9. This enables the month setting operation.

  9. Rotate the crown to change the month.

    10. 5672_17_ATDS

  10. Press (C).

    11. The mode hand will move slightly, indicating that the day setting operation is enabled.

    Changing the day setting will cause the mode hand to rotate repeatedly.

    Hand and Day Indicator Movement

  11. Rotate the crown to change the day.

    12. 5672_18_ATDS

    To return to the hour and minute setting operation, press (C).

  12. On a time signal at the top of a minute, push the crown back in and lock it.

Configuring the Summer Time Setting (Home City)

The watch’s current time setting can be changed to summer time when required.

[STD]: The watch always indicates standard time.

[DST]: The watch always indicates summer time.

Important!

If the Home City time zone is an area where time calibration signal reception is possible, you can select [AT] (Auto) for the summer time setting. While [AT] is specified as the summer time setting, the first time calibration signal receive operation after the Home City enters the summer time period will cause the watch’s time setting to switch to summer time. The first time calibration signal receive operation after the end of the summer time period is reached will cause the watch’s time setting to switch to standard time.
For information about areas where time calibration signals can be received, go to the section below.

City (Time Zone) Table

  1. Loosen the crown and then pull it out to the second click.

    2. The second hand will point to the currently selected time zone.

    The mode hand will point to the summer time setting for the currently selected Home City.

    5672_TMzone

  2. Hold down (B) for at least one second.

    3. Each time you hold down (B) for at least one second, the summer time setting will cycle to the next available option.

    5672_19_ATDS

  3. Push the crown back in and then lock it.

Back

Next