Module No. 5502

Adjusting the Time and Day Setting

1.Pull out the crown to the second click.

The second hand will move to the current Home City.

5502_39_ATDS

2.Hold down (C) for about 10 seconds.

This causes the second hand to move to 12 o’clock, and enables the minute setting operation.

3.Rotate the crown to change the minute setting.

4.Press (C).

The hour hand will move slightly, indicating that the hour setting operation is enabled.

5.Rotate the crown to change the hour setting.

6.Press (C).

This changes to the year setting operation.

5502_40_ATDS
5502_41_ATDS

7.Rotate the crown to move the hour hand to the desired setting for the year ten’s digit, and the minute hand to the desired one’s digit.

8.Press (C).

This enables the month setting operation.

5502_42_ATDS

9.Rotate the crown to change the month.

10.Press (C).

The mode hand will move slightly, indicating that the day setting operation is enabled.

5502_43_ATDS
  • The mode hand will rotate repeatedly as you are adjusting the date setting.
Hand and Day Indicator Movement

11.Rotate the crown to change the day.

12.On a time signal at the top of a minute, push the crown back in.