Whenever you are in a hospital, on an aircraft, or in any other location where auto signal receive or connection with a phone may cause problems, you can perform the procedure below to disable it (Airplane Mode). To re-enable auto time adjustment, perform the same operation again.

1.Enter the Timekeeping Mode.

Navigating Between Modes

2.Press (D).

The second hand will indicate the last receive result for nine or ten seconds. If location information was received, the second hand will indicate the Home City time zone after indicating the receive result.

3.Within 10 seconds after pressing (D) above, pull out the crown to the first click.

• If more than 10 seconds elapse before you pull out the crown after you press (D), the second hand will return to indicating seconds. If this happens, press (D) again.

4.Rotate the crown to enter the Airplane Mode.

N(NO): Airplane Mode enabled
Y(YES): Airplane Mode disabled

5.Push the crown back in.

• When the watch is in the Airplane Mode, the mode hand points to .