Configuring World Time Settings
Specifying a World Time City with CASIO WATCHES causes the city’s time to be indicated by the small hour and minute hands. Watch settings can be configured for auto summer time switching for the World Time City.
To select a World Time City
-
1.
Tap the “CASIO WATCHES” icon. -
2.
Hold down (C) for about 2.5 seconds. -
This causes the second hand to move to [C] and establishes a connection between the watch and phone.
- The second hand will point to “N” if connection fails for some reason.
-
3.
Perform the operation shown on the phone screen. The World Time setting will be reflected on the watch. -
- You can determine whether a World Time is a.m. or p.m. by checking the position of the small 24-hour hand.
Configuring the Summer Time Setting
-
1.
Tap the “CASIO WATCHES” icon. -
2.
Hold down (C) for about 2.5 seconds. -
This causes the second hand to move to [C] and establishes a connection between the watch and phone.
- The second hand will point to “N” if connection fails for some reason.
-
3.
Perform the operation shown on the phone screen to configure the summer time setting. -
- “Auto”
The watch switches between standard time and summer time automatically.
- “OFF”
The watch always indicates standard time.
- “ON”
The watch always indicates summer time.
- “Auto”
Swapping Your World Time and Home Time
-
1.
Tap the “CASIO WATCHES” icon. -
2.
Hold down (C) for about 2.5 seconds. -
This causes the second hand to move to [C] and establishes a connection between the watch and phone.
- The second hand will point to “N” if connection fails for some reason.
-
3.
Perform the operation shown on the phone screen to swap your Home Time with your World Time. -
For example, if your Home City is Tokyo and the World Time City is New York, they will be swapped as shown below.
- The second hand will point to the time zone of the currently selected World Time City for a few seconds after you swap times.
Top of page