Module No. 3515

Specifying the Night Time

Specify your night time.

After you specify your night time, you can link notification reception from your phone and your heart rate measurement settings NIGHT TIME.

  1. Display the current time screen.

  2. Hold down (A) for at least two seconds.

  3. This enters the Control Mode.

  4. Use (A) and (D) to select [SETTING].

  5. 3515_SETTING
  6. Press (C).

  7. This displays the setting menu screen.

    3515_Set_Menu_caps
  8. Use (A) and (D) to move the pointer to [GENERAL SETTINGS].

  9. Press (C).

  10. This displays the GENERAL SETTINGS screen.

    3515_GENERAL_SET
  11. Use (A) and (D) to move the pointer to [NIGHT TIME].

  12. Press (C).

  13. This causes a cursor to appear at the hour setting of the night time start time.

  14. Use (A) and (D) to change the start time hour setting.

  15. 3515_133_Other
  16. Press (C).

  17. This causes the cursor to move to the start time minute setting.

  18. Use (A) and (D) to change the start time minute setting.

  19. 3515_134_Other
  20. Press (C).

  21. This causes the cursor to move to the end time hour setting

  22. Use (A) and (D) to change the end time hour setting.

  23. 3515_135_Other
  24. Press (C).

  25. This causes the cursor to move to the end time minute setting.

  26. Use (A) and (D) to change the end time minute setting.

  27. 3515_136_Other
  28. Press (C) to complete the setting operation.

  29. After the setting operation is complete, a check mark appears for a few seconds, and then the night time setting screen re-appears.

  30. Hold down (E) for at least one second to return to the current time screen.

Note

The allowable night time setting range is no shorter than six hours and no longer than 12 hours. If you configure a setting outside this range, the end time is automatically corrected, so the setting is within the allowable range.

If you do not perform any operation for two or three minutes while the setting screen is displayed, the watch automatically returns to the current time screen.

If sleep measurement is performed while [ACTIVITY & NIGHT TIME ON] is selected for heart rate measurement, sleep measurement will start from the time set for NIGHT TIME. For the NIGHT TIME time setting, specify your normal sleep time (bedtime and wake-up time).

Back

Next