Module No. 3513

Checking the Current Altitude

  1. Enter the Altimeter Mode.

    2. Navigating Between Modes

    You can select either of two Altimeter Mode screens.

    Changing Displayed Information
    3513_43_81_ALTI

    Entering the Altimeter Mode will start altitude measurement and display the altitude at your current location.

    The watch takes altitude readings every second for about the first three minutes. After that, it takes readings according to the watch’s auto measurement interval setting.

    Check the information at the link below to find out how to configure the auto measurement interval.

    Setting the Measurement Interval for Auto Record Data and Climb Record Data

    To retrigger measurement, press (A).

    To return to the Timekeeping Mode, press (D).

Note

Measurement range: -700 to 10,000 meters (-2,300 to 32,800 feet) (Measurement unit: 1 meter (5 feet))
Note that calibrating altitude readings will cause a change in the measurement range.

[- - -] will appear for the measured value if it is outside the allowable range.

Altitude Graph Screen

3513_46_ALTI

Altitude Differential Screen

3513_45_ALTI

  1. Current location altitude

  2. Altitude graph

  3. Differential between reference altitude and current altitude

Interpreting Altitude Graph Contents

3514_ALTI_80m_Graph

1 square (mark_square) is 10 m.

Back

Next