Module No. 3506

Turning Off an Alarm

To stop an alarm sound and/or vibration operation, perform the steps below to turn it off.

To reactivate an alarm sound and/or vibration operation, turn it back on.

Note

An indicators is displayed while any one of the alarms is turned on.

The alarm indicator is not displayed while all of the alarms are turned off.

3506_26_ALM

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Hold down (A) for at least two seconds.

    3. This displays the Timekeeping Mode setting screen.

    3506_set_disp_caps

  3. Use (A) and (C) to move the pointer to [ALARM].

  4. Press (B).

  5. Use (A) and (C) to move the pointer to the alarm you want to turn off.

    6. 3506_27_ALM

  6. Press (B).

  7. Use (A) and (C) to select [OFF].

  8. Press (D).

  9. Use (A) and (C) to select whether or not you want to save your current settings.

    10. [YES]

    Saves current settings.

    [NO]

    Discards current settings.

    [RETURN]

    Returns to the alarm setting screen.

  10. Press (B) to complete the setting operation.

    11. After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the alarm setting selection screen will re-appear.

  11. Press (D) twice to exit the setting screen.

    12. Turning off all alarms will cause 3475_inl_icon_ALM_on (alarm) to disappear from the display.

    3506_28_ALM

Note

If 3475_inl_icon_ALM_on (alarm) is still displayed, it means that at least one of the other alarms is still turned on. To turn off all of the alarms repeat steps 5 through 10 until the 3475_inl_icon_ALM_on (alarm) indicator is no longer displayed.

Back

Next