Standard Requirements

Your Moflin and their parts and accessories are not toys. When using your Moflin, keep them out of the reach of small children and other people who require supervision.

Caution

The Moflin Bed (charger) should not be used by children under the age of 8.

Anyone using your Moflin should be given thorough instructions on how to use them safely and told that your Moflin is not a toy and should not be played with.

Warning

Only the enclosed USB-AC adaptor (5.0 VDC, 3 A) can be used with the Moflin Bed (charger).

This guide contains important information on topics such as the instructions and required markings on your Moflin and must be retained for future reference.

mark_toy_IEC-60417_No5219-6181_ISO-7000_No0790

Warning

The Moflin is not suitable for children under the age of 3.

The USB-AC adaptor is not a toy.

Note for Parents:

The USB-AC adaptor is not intended to be used in the same way as your Moflin or the Moflin Bed (charger). Any use of the USB-AC adaptor by children must be strictly supervised by their parents or guardians.

USB-AC adaptor or battery charger used with this product shall be regularly examined for damage to the supply cord, plug, enclosure or other parts, and in the event of damage, it shall not be used until the damage has been repaired.

Misuse of USB-AC adaptor can cause electrical shock.

This product contains batteries that are non-replaceable.

Products liable to be cleaned with liquids are to be disconnected from the USB-AC adaptor before cleaning.

When using your Moflin Bed (charger), keep it out of the reach of small children and other people who require supervision.

mark_battery precauions

Observe the precautions below. Failure to do so can cause the battery to explode or leak flammable liquid or gas.

Do not burn a battery or dispose of it in an incinerator, or by mechanical crushing or cutting.

Do not subject a battery to excessively high or low temperatures during use, storage, or transport.

Do not subject a battery to excessively low barometric pressure during use, storage, or transport.

A labels rating is affixed to the bottom of the Moflin Bed (charger).

The U.S.A.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

 

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

USB cable with ferrite core must be used for RF interference suppression.

 

For PE-M11

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy.

 

For PE-HS2-M

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment must be installed and operated keeping the radiator at least 20cm or more away from person’s body.

Supplier’s Declaration of Conformity

mark_FCC

Model Number

PE-M11, PE-HS2-M (Part 15 and 18)
AD-G50300UJ (Part 15 only)

Trade Name

CASIO COMPUTER CO., LTD.

Responsible party

CASIO AMERICA, INC.

Address

Suite 300, 100 Enterprise Drive, Rockaway NJ 07866, U.S.A.

Telephone number

973-361-5400

 

This device complies with Part 15 and Part 18 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

 

CFR 47 §2.938 (b)(2) Attestation

This device is not produced by any entity identified on the Covered List, established pursuant to §1.50002 of the FCC rule, as producing covered communications equipment.

Canada

This Class B digital apparatus complies with Canadian ICES-003.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

 

For PE-M11

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules as this equipment has very low levels of RF energy.

 

For PE-HS2-M

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment must be installed and operated keeping the radiator at least 20cm or more away from person’s body.

Was this information useful?

Previous

Next