Precautions During Use
To ensure that your printer provides you with the many years of operation for which it is designed, be sure to note the important precautions described below.
Avoid using the printer in any location where any of the following is present: exposure to direct sunlight, high humidity, static electric charge, extreme temperature fluctuations, extreme temperatures. The operating temperature range of the printer is: 10°C to 35°C (50°F to 95°F).
Do not subject the printer to strong impact.
Do not allow paper clips or pins to get into the printer.
Do not forcibly pull tape out of or push it back into the printer.
Do not allow cut tape to accumulate around the tape outlet. Tape blocking the tape outlet may cause the tape to jam. Such conditions can cause errors, interfere with proper tape cutting, or other malfunctions. Use tweezers or a cotton swab to remove tape cuttings as required.
Dirt or other foreign matter adhering to the printer head can cause horizontal stripes with missing dots on printed tapes. If this happens, clean the print head and the rubber roller as described in “Cleaning”.
Using the printer in a location exposed to strong direct sunlight can cause malfunction of the printer’s internal light sensor, resulting in display of error messages.
In order to ensure best printer function and stability, always use only genuine CASIO tape cartridges. Use of a non-CASIO tape cartridge can harm your printer, result in poor printing quality, and cause other problems that can permanently affect the printer’s ability to perform at the level for which it was designed. Also note that problems caused by use of a non-CASIO tape cartridge are not covered by the printer’s warranty, so any charges required for servicing and repair must be borne by you.
Precautions When Using Bluetooth Functions
Because this printer uses wireless communication, it may affect or be affected by nearby equipment.
Frequencies used
This printer uses frequencies in the 2.4 GHz band that may also be used by other wireless equipment.
To prevent radio interference with other wireless equipment, note the following when using this printer.
This printer includes built-in wireless devices for a low-power data communications system.
Other equipment that operates in the frequency band being used includes industrial, scientific and medical equipment such as microwave ovens, along with other wireless stations of the same type, in-plant wireless stations for mobile object identification that require a permit and are used in facilities such as factory production lines, specific low-power wireless stations that do not require a permit, and amateur wireless stations (hereinafter referred to collectively as “other wireless stations”).
Check that there are no other wireless stations operating nearby before using the printer.
If any radio interference occurs between this printer and other wireless stations, immediately move the printer to another location or stop using the printer.
If any other difficulties arise, such as radio wave interference, contact your original retailer or a CASIO Service Center.
Using This Printer as a Wireless Device
The wireless function in this product should be used within the limitations stated in this User’s Guide.
CASIO COMPUTER CO., LTD. accepts no liability whatsoever for any damages arising from other uses of this product.
Magnetism, electrostatic charge and radio interference
Do not use this product in locations exposed to magnetism, electrostatic charge or radio interference, such as close to a microwave oven. In some environments, it may not be possible to receive radio waves.
Also, using this product close to a device that uses radio waves in the 2.4 GHz band may result in lower processing speeds in both devices.
Personal Information
Personal information is the name, address, phone number, and date of birth information that can be used to identify a particular individual.
The label showing the ratings for this product is located under the cover.