Skip to content

CASIO

User´s Guide

 Menu

Registering and Using Defining Equations for f(x) and g(x)

Your calculator includes "f(" and "g(" functions that you can use after registering defining equations for them. For example, after registering f(x) = x2 + 1 as a defining equation for the "f(" function, you can calculate f(0) = 1 and f(5) = 26.

Pressing displays a menu for registering the defining equation of f(x) or g(x), and for inputting "f(" or "g(".

Note

The defining equations of f(x) and g(x) are also used by f(x) and g(x) in the Table app. For information about the Table app, see "Creating a Number Table".

Registering a Defining Equation

Example 1: To register f(x) = x2 + 1

1. Press , select the Calculate app icon, and then press .

2. Press , and then select [Define f(x)].

This displays the f(x) equation registration screen.

3. Input x2 + 1.

  • 1

4. Press .

This registers the expression you input, and the screen that was shown before you pressed in step 2 of this procedure re-appears.


Note

A defining equation can be registered from any calculator app except Math Box. However, depending on the screen displayed by the calculator app (for example, if a menu screen is displayed), the menu may not appear when you press .

Performing a Calculation by Assigning a Value to the Registered Defining Equation

Example 2: To assign the value x = 3 to f(x), which you registered in Example 1

(Continuing from Example 1)

1. Press , and then select [f(x)].

This inputs "f(".

2. Assign a value of 3 and then execute the calculation.

  • 3

Registering a Composite Function

Example 3: To insert f(x) defined in Example 1 into g(x) in order to register g(x) = f(x) × 2 - x

(Continuing from Example 1)

1. Press , and then select [Define g(x)].

This displays the g(x) equation registration screen.

2. Input f(x) × 2 - x.

  • *2

* Pressing while the g(x) equation registration screen is displayed, the only menu item that appears is [f(x)]. In the same way, pressing while the f(x) equation registration screen is displayed, the only menu item that appears is [g(x)].

3. Press .

This registers the equation you input and returns to the screen displayed before you started this operation with step 1.


Note

The operation for assigning a value to x of g(x) and calculating the result is the same as that under "Performing a Calculation by Assigning a Value to the Registered Defining Equation". However, note that instead of selecting [f(x)] in step 1, you should select [g(x)].

In the operation of Example 3, you input f(x) into the defining equation of g(x). Conversely, you can also input g(x) into the f(x) defining equation. However, do not have g(x) input into f(x), and f(x) input into g(x) at the same time. If you do, a Circular ERROR will occur when you perform a calculation using f(x) or g(x).

Data Retention

Performing any one of the operations below causes the defining equations registered to f(x) and g(x) to be deleted.

Pressing

Using the SETTINGS menu to switch the Input/Output setting between MathI*1 and LineI*2.

*1 MathI/MathO or MathI/DecimalO

*2 LineI/LineO or LineI/DecimalO

Executing – [Reset] > [Settings & Data] or – [Reset] > [Initialize All]

print this page
Top of page