Main Specifications
Common Specifications
- 3.35 cm (1.32-inches) dual layer display, Color TFT LCD (320 × 300 pixels) + Monochrome LCD
- Capacitive touch panel
- Microphone
- Vibration
- Battery:
Type: Lithium-ion battery
Charging time:
Approximately 2 hours at room temperature (Be sure to use the special charger cable and AC adaptor.)
- Bluetooth: Bluetooth® 4.1 (Low Energy support)
- Wi-Fi: IEEE802.11b/g/n
- Memory & storage: 512 MB RAM, 4 GB internal storage
- Charging method: Magnetic crimped charging terminal
- Buttons: TOOL button, Power button, APP button
- 5-bar (50-meter) water resistant*1
- Environment performance: MIL-STD-810G (United States military standard issued by the U.S. Department of Defense)
- Watch:
Auto time correction:
By communication with smartphone (Time can be adjusted manually.)
By GPS information (Can be corrected manually.)
Time zones (world time function):
Supports multiple world time zones (Types depend on system time zones.)
12/24-hour timekeeping
Full auto-calendar:
Auto switching by linking with smartphone
Summer time:
Auto switching by linking with smartphone
Watch faces:
Three favorites, more can be added.
- TOOL App:
Compass:
Measurement range: 0° to 359°
Measurement unit: 1°
Continuous measurement duration: 1 minute
North Indication hand, Magnetic declination calibration, Bearing memory, Gradient calibration
Altimeter:
Measurement range: –700 to 10,000 m (–2,300 to 32,800 ft)
Measurement unit: 1 m (5 ft)
Measurement accuracy: within ±75 m (within ±250 ft) (When frequent manual calibration is performed)
Shortest measurement interval: 1 minute
Altitude graph: Past 24 hours
Manual altitude calibration, Auto altitude calibration using location information*2
Barometer:
Measurement range: 260 to 1,100 hPa (7.6 to 32.5 inHg)
Measurement unit: 1 hPa (0.1 inHg)
Measurement accuracy: within ±3 hPa (within ±0.1 inHg)
Atmospheric pressure tendency graph: Past 24 hours
Barometric pressure measurement interval: 1 minute
Manual barometric pressure calibration
Tide and Fishing:
Tide graph: Past 12 hours + Next 12 hours
Fishing time (Calculated according to current location, and moon hour angle and age.)
Sunrise/sunset:
Sunrise/Sunset times (Current location sunrise/sunset)
Sunrise/Sunset directions: Accuracy depends on compass
My Graph*4:
Daily activity pattern: Stopped, walking, running, vehicle
Calories burned, Steps, Altitude (Highest altitude achieved that day), Workout time
- Screen brightness setting: 5 levels
- Watch battery level indicator: Integer value, 0 to 100%
- Charger (AC adaptor):
INPUT: AC 100 V to 240 V 50 Hz/60 Hz
OUTPUT: 5.0 V
- Charger cable:
Length: Approximately 0.75 m (2.46 ft)
Type: AC adaptor USB Type A
- Included accessories: Charger (AC adaptor), Special charger cable, Cloth band/Band replacement tool (WSD-F20X only)
- About MIL-STD-810G (United States military standard issued by the U.S. Department of Defense):
Description:
1. Drop
2. Random Vibration
3. Humidity
4. Solar-Radiation
5. Non-Operating Altitude
6. Operating Altitude
7. Non-Operating High Temperature
8. Non-Operating Low Temperature
9. Temperature Shock
10. Icing Freezing Rain
Procedure: MIL-STD-810G, w/change1
1: Method 516.7 ProcedureⅣ
2: Method 514.7 ProcedureⅠ
3: Method 507.6 ProcedureⅡ
4: Method 505.6 ProcedureⅡ
5: Method 500.6 ProcedureⅠ
6: Method 500.6 ProcedureⅡ
7: Method 501.6 ProcedureⅠ
8: Method 502.6 ProcedureⅠ
9: Method 503.6 ProcedureⅠ-C
10: Method 521.4 ProcedureⅠ
Attention:
The functions of this watch have been confirmed under test environments, but no guarantees are made concerning operation under all environments where it may be used. Also, no guarantees are made concerning the ability of the watch to withstand damage or malfunction.
- Phones & tablets that work with Wear OS by Google
Wear OS by Google works with phones running Android 4.4+ (excluding Go edition)*5 or iOS 10+*5*6. Supported features may vary between platforms and countries.
Visit g.co/wearcheck on your Android phone or iPhone® to see if it’s compatible.
Model Specific Specifications
|
WSD-F10 |
WSD-F20 Series |
||
---|---|---|---|---|
Sensors |
Pressure sensor, Accelerometer, Gyrometer, Magnetic sensor |
GPS, Pressure sensor, Accelerometer, Gyrometer, Magnetic sensor |
||
Operating time on full charge*1 |
Normal use: More than one day |
|||
Operating temperature |
0℃ to 40℃ (32℉ to 104℉) |
-10℃ to 40℃ (14℉ to 104℉) |
||
Crystal |
Mineral glass |
WSD-F20/WSD-F20X/WSD-F20A: Mineral glass (dirt resistant coating) WSD-F20S/WSD-F20SC: Sapphire glass (dirt resistant coating) |
||
Activity App |
Trekking, Fishing, Cycling*7 |
Trekking, Fishing, Cycling, Paddle, Snow |
||
MOMENT SETTER App |
Trekking, Fishing, Cycling notifications |
Trekking, Fishing, Cycling, Paddle, Snow notifications |
||
Location Memory App |
- |
Map screen, route screen, selectable map skin, map downloading (off-line maps), voice memo, landmark, Revisit marks*3, history screen |
||
Approx. Size (Body H × W × D) |
61.7 × 56.4 × 15.7 mm (2.4” × 2.2”× 0.6”) |
WSD-F20/WSD-F20X/WSD-F20A: 61.7 × 57.7 × 15.3 mm (2.4” × 2.3”× 0.6”) WSD-F20S/WSD-F20SC: 61.7 × 57.7 × 15.1 mm (2.4” × 2.3”× 0.6”) |
||
Approx. Weight (including band) |
93 g (3.3 oz) |
WSD-F20:92 g (3.2 oz) WSD-F20S:105 g (3.7 oz) WSD-F20X:94 g (3.3 oz) (including soft urethane band), 90 g (3.2 oz) (including cloth band) WSD-F20A:90 g (3.2 oz) WSD-F20SC:124 g (4.4 oz) |
*1 CASIO test conditions
*2 GPS altitude information is used, so the indicated altitude may not exactly match the actual above sea level elevation or altitude.
*3 In order to be able to use these functions your Android phone must have the CASIO MOMENT SETTER+ app installed, and there must be a connection between the phone and watch. These functions are not supported in the case of iOS.
*4 Default: OFF
*5 Recommended. However, a WSD-F10, F20, F20S, or F20X watch that is already paired with a smartphone running Android 4.3+ or iOS 9+ can also be used.
*6 Limited functionality when connected to iOS device.
*7 Available only while the watch is connected with an Android phone.