Module No. 5724
Enabling the Button Operation Tone
Use the procedure below to enable or disable the tone that sounds when you press a button.
-
Enter the Timekeeping Mode.
-
Hold down (A) for at least two seconds until the name of the currently selected Home City is displayed.
-
Press (C) 11 times.
-
Press (D) to select [KEY♪] or [MUTE].
-
Press (A) to exit the setting screen.
This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators.
![5724_fl_SET_HT_caps](fig/5724_fl_SET_HT_caps_AHNIILryadwoig.png)
This causes [KEY♪] or [MUTE] to flash on the display.
![5724_41_Other](fig/5724_41_Other_AHNIILhktffaki.png)
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
![5724_42_Other](fig/5724_42_Other_AHNIILdlgyeyjo.png)
Note
While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.
Note that alarm and timer tones will still sound even while the operation tone is muted.