Module No. 5714
Viewing the Speed Display
When measuring the elapsed time in Stopwatch Mode, the speed value is obtained by dividing the specified distance by the measured elapsed time (in hours).
The 100s digit is indicated by the upper speed (100s digit) graphic.
If it exceeds 1000, the [
] 1000 graphic is displayed.
Values less than the 100s digit are indicated by the speed hand. Only even numbers are indicated.
Example:
When the speed is 1740, the [] 1000 graphic is displayed.
The upper speed (100s digit) graphic shows 700.
The speed hand points to 40.
Speeds can be indicated in the range of 0 to 1998. [OVER] is displayed for speeds greater than 1998.
Note
If you specify a distance of 0.0, 0 will be shown for the speed. At this time, the speed hand makes one revolution and returns to the 0 position.
Button operations are disabled while the speed hand is moving.