Module No. 5713

Checking the Current Temperature

  1. Enter the Thermometer Mode.

    2. Navigating Between Modes

    Entering the Thermometer Mode will start temperature measurement and display the result.

    After you enter the Thermometer Mode, the watch takes readings about every five seconds for three minutes. After that, a measurement is taken about every two minutes.

    To retrigger measurement, press (A).

    5713_69_TEMP

Note

If the hour and/or minute hand is located over the digital display when you perform a temperature measurement, the hands will temporarily shift to the 22-second or 38-second position to allow easier reading of measurement values. The hands will unshift to their normal positions after about three seconds.

The watch will automatically return to the Timekeeping Mode if you do not perform any operation in the Thermometer Mode for about one hour.

The measuring range is -10.0 °C to 60.0 °C (14.0 °F to 140.0 °F) (0.1 °C (0.2 °F) units). [- - .-] will appear for the measured value if it is outside the allowable range.

To return to the Timekeeping Mode, hold down (B) for at least two seconds.

Back

Next