Module No. 5713

Specifying the Temperature Measurement Unit

You can select either Celsius (°C) or Fahrenheit (°F) as the temperature display unit.

Important!

When Tokyo (TYO) is the Home City, the temperature unit is fixed as Celsius (°C) and cannot be changed.

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Loosen the crown and then pull it out.

    3. The currently selected Home City will appear on the display.

    5713_HT_SET_NY

  3. Press (B) nine times.

    4. This causes [UNIT] to appear, with [°C] or [°F] flashing.

    5713_70_TEMP

  4. Rotate the crown to select a temperature unit.

    5. [°C]: Celsius

    [°F]: Fahrenheit

    5713_71_disp_TEMP

  5. Push the crown back in and then lock it.

Note

If you do not perform any operation for about two minutes after pulling out the crown, crown operations will automatically become disabled. If that happens, push the crown back in and then pull it out again.

Back

Next