Module No. 5713

Turning Off an Alarm or the Hourly Time Signal

To stop an alarm or the hourly time signal from sounding, perform the steps below to turn it off.

To have an alarm or hourly time signal sound again, turn it back on.

Note

Indicators are displayed while any of the alarms or the hourly time signal is turned on.

The applicable indicators are not displayed while all of the alarms are turned off and/or the hourly time signal is turned off.

5713_44_ALM

  1. Enter the Alarm Mode.

    2. Navigating Between Modes

  2. Use (A) and (C) to scroll through the alarm number ([AL1] to [AL5]) and hourly time signal ([SIG]) screens until the one you want to turn off is displayed.

    3. 5713_45_ALM

  3. Press (D) to turn off the displayed alarm or the hourly time signal.

    4. Each press of (D) toggles between on and off.

    Turning off all alarms will cause ALM (alarm) to disappear from the display, while disabling the hourly time signal causes SIG (hourly time signal) to disappear from the display.

    5713_46_ALM

Note

If ALM (alarm) is still displayed, it means that another alarm is still turned on. To turn off all of the alarms, repeat steps 2 and 3 until the ALM (alarm) indicator is no longer displayed.

Back

Next