Module No. 5702

Mode Overview

Calendar Mode

The main hour, minute, and second hands indicate the current time.

The small hour and minute hands show another time (Dual Time).

5702_05_Info

  1. Current location time (24-hour time)

    2. One revolution every 24 hours.

  2. Day of the week at current location

  3. Dual Time hour

  4. Dual Time minute

  5. Dual Time hour (24-hour hand)

    6. The hand points to the A-side for a.m. times, and to the P-side for p.m. times.

  6. Current location date

Time Adjustment Using a Time Calibration Signal

Hold down (D) for at least 0.5 seconds until the second hand points to [RC].

A manual time calibration signal receive operation cannot be performed while the watch is paired with a phone.

Swapping the Current Location Time and Dual Time

Hold down (B) for at least three seconds.

Connecting with a Paired Phone to Adjust the Watch’s Time

Hold down (D) for at least 0.5 seconds until the second hand points to [C].

Searching for a Paired Phone

Hold down (D) for at least five seconds.

Dive Mode

In this mode, the hour, minute, second and 24-hour hands indicate the elapsed dive time and surface interval time.

Dive time

To stop dive time measurement, hold down (D) for at least two seconds.

Stopping dive time measurement starts surface interval measurement.

5702_06_fl_Info

  1. Dive time hours

    2. This hand performs one revolution, which indicates two hours of dive time.
    Starting from 12 o’clock, this hand points to 6 o’clock after one hour of dive time and 12 o’clock after two hours.

  2. Dive time minutes

    3. The hour and minute hands move together.

  3. Dive time seconds

Surface interval

To stop surface interval measurement, press (D).

Stopping surface interval measurement starts dive time measurement.

5702_07_Info

  1. Surface interval hours (24-hour time)

    2. This hand performs one revolution, which indicates 24 hours of surface interval time.
    Starting from 12 o’clock, this hand points to 6 o’clock after 12 hours of surface interval time and 12 o’clock after 24 hours.

  2. Surface interval hours

  3. Surface interval minutes

  4. Surface interval seconds

Tide Graph Mode

The small hour and minute hands indicate the current time in the port you have specified.

The main hour, minute, and second hands indicate the current time.

5702_08_Info

  1. Tide Level

  2. Current time in selected port

Stopwatch Mode

The second hand, and the small hour and minute hands indicate the elapsed stopwatch time.

The main hour and minute hands indicate the current time.

5702_09_Info

  1. Stopwatch seconds

  2. Stopwatch hours

  3. Stopwatch minutes

  4. Stopwatch hours (24-hour time)

    5. The hand points to the A-side for hours 0 through 12, and to the P-side for hours 12 through 24.

Timer Mode

The second hand, and the small hour and minute hands indicate the current countdown time.

The main hour and minute hands indicate the current time.

5702_10_Info

  1. Timer seconds

  2. Timer hours

  3. Timer minutes

  4. Timer hours (24-hour time)

    5. The hand points to the A-side for hours 0 through 12, and to the P-side for hours 12 through 24.

Alarm Mode

The small hour and minute hands indicate the alarm time.
The second hand indicates the alarm enabled/disabled setting.

The main hour and minute hands indicate the current time.

5702_11_Info

  1. Alarm enabled/disabled

  2. Alarm hour

  3. Alarm minute

  4. Alarm hour (24-hour time)

    5. The hand points to the A-side for a.m. times, and to the P-side for p.m. times.

Back

Next