Module No. 5702

Using Watch Operations to Adjust the Time Setting

If your watch cannot connect with a phone for some reason, you can use watch operations to adjust date and time settings.

Selecting Your Home City’s Time Zone

Use the procedure in this section to select the time zone of the city you want to use as your Home City.

Important!

If you do not specify the time zone where you are using the watch, the current time setting will not be correct after it is adjusted based on a time calibration signal.

  1. Loosen the crown and then pull it out to the second click.

  2. The second hand indicates the currently selected time zone, while the mode hand indicates the current summer time setting.

    The time zone is indicated as a time offset. ±0 hours is indicated when the second hand is at 12 o’clock, with other offsets indicated when it is to the left and right of 12 o’clock. For information about time zone positions, go to the section below.

    Tokyo (+9 offset)

    5702_18_ATDS
  3. Rotate the crown to change the time zone.

  4. Push the crown back in and then lock it.

Adjusting the Time and Day Setting

  1. Loosen the crown and then pull it out to the second click.

  2. The second hand will point to the currently selected time zone.

    The mode hand will point to the summer time setting for the currently selected Home City.

    5702_16_UMLW_comon
  3. Hold down (C) for at least one second.

  4. This causes the second hand to move to 12 o’clock, and enables the minute setting operation.

  5. Rotate the crown to change the minute setting.

  6. Press (C).

  7. The hour hand will move slightly, indicating that the hour setting operation is enabled.

  8. Rotate the crown to change the hour setting.

  9. Press (C).

  10. This enables the year ten’s digit setting operation.

  11. Rotate the crown to move the second hand to the desired setting for the year ten’s digit.

  12. 5702_19_ATDS
  13. Press (C).

  14. This enables the year one’s digit setting operation.

  15. Rotate the crown to move the second hand to the desired setting for the year one’s digit.

  16. 5702_20_ATDS
  17. Press (C).

  18. This enables the month setting operation.

  19. Rotate the crown to change the month.

  20. 5702_21_ATDS
  21. Press (C).

  22. The mode hand will move slightly, indicating that the day setting operation is enabled.

    Changing the day setting will cause the mode hand to rotate repeatedly.

  23. Rotate the crown to change the day.

  24. 5702_22_ATDS
  25. On a time signal at the top of a minute, push the crown back in and lock it.

Configuring the Summer Time Setting (Home City)

The watch’s current time setting can be changed to summer time when required.

[STD]: The watch always indicates standard time.

[DST]: The watch always indicates summer time.

Important!

If the Home City time zone is an area where time calibration signal reception is possible, you can select [AT] (Auto) for the summer time setting. While [AT] is specified as the summer time setting, the first time calibration signal receive operation after the Home City enters the summer time period will cause the watch’s time setting to switch to summer time. The first time calibration signal receive operation after the end of the summer time period is reached will cause the watch’s time setting to switch to standard time.
For information about areas where time calibration signals can be received, go to the section below.

  1. Loosen the crown and then pull it out to the second click.

  2. The second hand will point to the currently selected time zone.

    The mode hand will point to the summer time setting for the currently selected Home City.

    5702_16_UMLW_comon
  3. Hold down (B) for at least one second.

  4. Each time you hold down (B) for at least one second, the summer time setting will cycle to the next available option.

    5702_23_ATDS
  5. Push the crown back in and then lock it.

Back

Next