Module No. 5698

Resetting Watch Settings

This section explains how to return the watch settings below to their initial factory defaults.

Watch Settings

Stopwatch

Timer

Alarm

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Hold down (A) for at least two seconds until the name of the currently selected Home City is displayed.

    3. This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators.

    5698_fl_HT_SET_comon

  3. Press (C) twice.

    4. This causes the seconds to flash.

    5698_49_Other

  4. Hold down (B) for at least seven seconds. This will cause the [ALL] and [RESET] indicators to alternate on the display. Release the button when only [RESET] is displayed.

    5. 5698_50_Other

  5. Press (A) to exit the setting screen.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

Resetting the watch will also delete information for pairing the watch with a phone, and unpair them.

Back

Next