1. Enter the Timekeeping Mode.

Navigating Between Modes

2. Hold down (A) for at least two seconds. Release the button when the seconds start to flash.

This enters the setting mode. The hands automatically shift out of the way for easy viewing of the screen.



3. Keep pressing (C) until the setting you want to change is flashing.

Each press of (C) moves the flashing to the next setting in the sequence shown below.



4. Configure the date and time settings.

To reset the seconds to 00: Press (D). 1 is added to the minutes when the current count is between 30 and 59 seconds.

For all the other settings, use (B) and (D) to change the flashing setting.
Holding down (B) or (D) scrolls through settings at high speed.

5. Repeat steps 3 and 4 to select time and date settings.

6. Press (A) to complete the setting operation.

1. Enter the Timekeeping Mode.

Navigating Between Modes

2. Hold down (A) for at least two seconds. Release the button when the seconds start to flash.

This enters the setting mode. The hands automatically shift out of the way for easy viewing of the screen.



3. Press (C).

4. Use (D) to change the summer time setting.

[OFF]
The watch always indicates standard time.

[ON]
The watch always indicates summer time.



5. Press (A) to complete the setting operation.

You can specify either 12-hour format or 24-hour format for the time display.

1. Enter the Timekeeping Mode.

Navigating Between Modes

2. Hold down (A) for at least two seconds. Release the button when the seconds start to flash.

This enters the setting mode. The hands automatically shift out of the way for easy viewing of the screen.



3. Press (C) twice.

This causes [12H] or [24H] to flash on the display.



4. Press (D) to select [12H] (12-hour timekeeping) or [24H] (24-hour timekeeping).



5. Press (A) to complete the setting operation.