Module No. 5673

Specifying the Temperature Measurement Unit

You can select either Celsius (°C) or Fahrenheit (°F) as the temperature display unit.

Important!

When Tokyo (TYO) is the Home City, the temperature unit is fixed as Celsius (°C) and cannot be changed.

  1. Enter the Thermometer Mode.

    2. Navigating Between Modes

  2. Pull out the crown.

    3. This displays the current temperature.

    5673_TEMP_Ofset_Mode

  3. Press (B).

    4. This causes [UNIT] to appear, with [°C] or [°F] flashing.

    5673_64_TEMP

  4. Rotate the crown to select a temperature unit.

    5. [°C]: Celsius

    [°F]: Fahrenheit

    5660_65_disp_TEMP

  5. Push the crown back in to complete the setting operation.

Note

If you do not perform any operation for about two minutes after pulling out the crown, crown operations will automatically become disabled. If that happens, push the crown back in and then pull it out again.

Back

Next