Module No. 5673

Checking the Current Temperature

  1. Enter the Thermometer Mode.

    2. Navigating Between Modes

    Entering the Thermometer Mode will start temperature measurement and display the result.

    After you enter the Thermometer Mode, the watch takes readings about every five seconds for three minutes. After that, a measurement is taken about every two minutes.

    To retrigger measurement, press (A).

    5673_63_TEMP

Note

The watch will automatically return to the Timekeeping Mode if you do not perform any operation in the Thermometer Mode for about one hour.

The measuring range is -10.0 °C to 60.0 °C (14.0 °F to 140.0 °F) (0.1 °C (0.2 °F) units). [- - .-] will appear for the measured value if it is outside the allowable range.

To return to the Timekeeping Mode, hold down (B) for at least two seconds.

Back

Next