Module No. 5671
Using the Crown
Pulling Out and Pushing In the Crown
To perform a crown operation, pull it out to the first or second click and then rotate it. Do not pull the crown with too much force.
First click
Second click
Important!
To prevent loss of water resistance and/or damage due to impact, be sure to push the crown in to its normal position after you are finished using it.
When pushing the crown back in, take care not to apply too much force.
Fast Forward/Fast Reverse
After pulling out the crown to the first or second click, rotating it quickly in succession in either direction will start a fast forward or fast reverse operation. While a fast forward operation is in progress, quickly rotating the crown in succession again will increase the speed even further.
Stopping Fast Forward/Fast Reverse
Rotate the crown in the direction opposite that of the ongoing operation or press any button.
Note
If you do not perform any operation for about two minutes after pulling out the crown, crown operations will automatically become disabled. If that happens, push the crown back in and then pull it out again.