The main hour, minute, and second hands indicate the current time.

The small hour and minute hands indicate the current World Time.

1. World Time hour

2. World Time minute

3. Current location time (24-hour time)

One revolution every 24 hours.

4. World Time hour (24-hour time)

The hand points to the A-side for a.m. times, and to the P-side for p.m. times.

5. Day of the week at current location

Checking the Current Home City

Press (A).

Swapping the Current Location Time and World Time

Hold down (A) for at least three seconds.

The second hand, and the small hour and minute hands indicate the elapsed stopwatch time.

The main hour and minute hands indicate the current time.

1. Stopwatch hours

2. Stopwatch minutes

3. Current location time (24-hour time)

One revolution every 24 hours.

4. Stopwatch seconds

The second hand indicates the current timekeeping seconds while the stopwatch is reset to all zeros.

5. Stopwatch hours (24-hour time)

The hand points to the A-side for hours 0 through 12, and to the P-side for hours 12 through 24.

6. Mode hand

The mode hand points to [STW] while an elapsed time measurement operation is in progress. The mode hand points to the Home City day of the week while the stopwatch is reset to all zeros.

Time Adjustment Using a Time Calibration Signal

Hold down (B) for at least 0.5 seconds until the second hand points to [R].

A manual time calibration signal receive operation cannot be performed while the watch is paired with a phone.

Checking the Charge Level

Pushing the crown back in after pulling it out will cause the current charge level to be indicated by the mode hand.

Connecting with a Paired Phone to Adjust the Watch’s Time

Hold down (B) for at least 0.5 seconds until the second hand points to [C].

Searching for a Paired Phone

Hold down (B) until the second hand points to [C] three times.