Module No. 5671

Configuring World Time Settings

Specifying a World Time City with CASIO WATCHES causes the watch’s World Time City to change accordingly. The standard time/summer time setting of the World Time will be adjusted automatically without any watch operation required by you.

5671_img_WT

Note

CASIO WATCHES World Time lets you select from among approximately 300 cities as the World Time City.

Selecting a World Time City

  1. phone-s Tap the “CASIO WATCHES” icon.

  2. wat_s Hold down (B) until the second hand points to [C] twice.

    3. This establishes a connection between the watch and phone.

    The second hand will point to [C] once after about 0.5 seconds, and then a second time after about 2.5 seconds.

    5671_Cmark

  3. phone-s Perform the operation shown on the phone screen. The World Time setting will be reflected on the watch.

    4. You can determine whether a World Time is a.m. or p.m. by checking the position of the small 24-hour hand.

    5671_13_MobileLink

Configuring the Summer Time Setting

  1. phone-s Tap the “CASIO WATCHES” icon.

  2. wat_s Hold down (B) until the second hand points to [C] twice.

    3. This establishes a connection between the watch and phone.

    The second hand will point to [C] once after about 0.5 seconds, and then a second time after about 2.5 seconds.

    5671_Cmark

  3. phone-s Perform the operation shown on the phone screen to select a summer time setting.

    4. “Auto”
    The watch switches between standard time and summer time automatically.

    “OFF”
    The watch always indicates standard time.

    “ON”
    The watch always indicates summer time.

Note

While the summer time setting is “Auto”, the watch will switch between standard time and summer time automatically. You do not need to switch between standard time and summer time manually. Even if you are in an area that does not observe summer time, you can leave the watch’s summer time setting as “Auto”.

Changing the time setting manually with a watch operation will cancel auto standard time/summer time switching.

CASIO WATCHES screen shows information about summer time periods.

Swapping Your World Time and Home Time

  1. phone-s Tap the “CASIO WATCHES” icon.

  2. wat_s Hold down (B) until the second hand points to [C] twice.

    3. This establishes a connection between the watch and phone.

    The second hand will point to [C] once after about 0.5 seconds, and then a second time after about 2.5 seconds.

    5671_Cmark

  3. phone-s Perform the operation shown on the phone screen to swap your Home Time with your World Time.

    4. For example, if your Home City is Tokyo and the World Time City is New York, they will be swapped as shown below.

    5671_fl_WT_change

Note

Auto time adjustment does not work for 24 hours after swapping of the Home Time and World Time.

Back

Next