Module No. 5671
Auto Time Adjustment
The watch will connect with a phone at preset times each day and adjust its time settings.
Using This Function
Your watch adjusts its time setting four times a day according to a preset schedule. If you leave the watch in the World Time Mode or in the Stopwatch Mode while it is reset to all zeros, it will perform the time adjustment operation automatically as you go about your daily life, without any operation required by you.
Important!
The watch may not be able to perform auto time adjustment under the conditions described below.
While the watch is too far away from its paired phone
While communication is not possible due to radio interference, etc.
While the phone is updating its system
While CASIO WATCHES is not running on the phone
Note
If the watch does not indicate the correct time even if it is able to connect with a phone, adjust the hand and day indicator positions.
If there is a World Time City specified with CASIO WATCHES, its time will also be adjusted automatically.
The watch will connect with the phone and perform auto time adjustment at around 12:30 a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The connection is automatically terminated after auto time adjustment is complete.
Triggering Immediate Time Adjustment
The watch’s time setting will be adjusted automatically whenever you establish a connection between the watch and a phone. Whenever you want to trigger immediate time adjustment, perform the procedure below to connect with a phone.
-
Move the phone close to (within one meter of) the watch.
-
Hold down (B) for at least 0.5 seconds until the second hand points to [C]. Release the button as soon as the second hand points to [C].
When the watch connects with a phone, the second hand will normally move to [Y(YES)] and then the watch’s time setting will be adjusted.
The connection is terminated automatically after time adjustment is complete.
