Module No. 5608

Troubleshooting

I can’t pair the watch with a phone.

Q1I’ve never been able to establish a (pairing) connection between the watch and phone.

Are you using a supported phone model?

Check if the phone model and its operating system are supported by the watch.
For information about supported phone models, visit the CASIO Website.

https://world.casio.com/os_mobile/wat/

Did you install the CASIO WATCHES phone app on your phone?

The CASIO WATCHES phone app needs to be installed on your phone in order to connect with the watch.

Are your phone’s Bluetooth settings configured correctly?

Configure the phone’s Bluetooth settings. For details about setting procedures, see your phone documentation.

iPhone Users

  • “Settings” arrowR “Bluetooth” arrowR On
  • “Settings” arrowR “Privacy” arrowR “Bluetooth” arrowR “CASIO WATCHES” arrowR On

Android Users

  • Enable Bluetooth.

Other than the above.

Some phones need to have BT Smart disabled to use CASIO WATCHES. For details about setting procedures, see your phone documentation.

On the Home Screen, tap: “Menu” arrowR “Settings” arrowR “Bluetooth” arrowR “Menu” arrowR “BT Smart settings” arrowR “Disable”.

I can’t reconnect the watch and phone.

Q1The watch will not re-connect with the phone after they are disconnected.

Is the CASIO WATCHES phone app running?

The watch cannot re-connect with the phone unless CASIO WATCHES is running on the phone. On the phone’s Home Screen, tap the “CASIO WATCHES” icon. Then on the watch, hold down (C) for at least 1.5 seconds. Release the button when [CONNECT] starts to flash.

5608_TM

Have you tried turning your phone off and then back on again?

Turn the phone off and then back on, and then tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least 1.5 seconds. Release the button when [CONNECT] starts to flash.

5608_TM

Q2I can’t connect while my phone is in the Airplane Mode.

Connection with the watch is not possible while the phone is in the Airplane Mode. After exiting the phone’s Airplane Mode, go to its Home Screen and tap the “CASIO WATCHES” icon. Then on the watch, hold down (C) for at least 1.5 seconds. Release the button when [CONNECT] starts to flash.

5608_TM

Q3I changed the phone’s Bluetooth from enabled to disabled, and now I can’t connect anymore.

On the phone, disable and then re-enable Bluetooth, and then go to the Home Screen and tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least 1.5 seconds. Release the button when [CONNECT] starts to flash.

5608_TM

Q4I can’t connect after turning off the phone.

Turn on the phone and tap the “CASIO WATCHES” icon. Then on the watch, hold down (C) for at least 1.5 seconds. Release the button when [CONNECT] starts to flash.

5608_TM

Phone-Watch Connection

Q1I can’t establish a connection between the phone and watch.

Have you tried turning your phone off and then back on again?

Turn the phone off and then back on, and then tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least 1.5 seconds. Release the button when [CONNECT] starts to flash.

5608_TM

Has the watch been re-paired with the phone?

After deleting pairing information from CASIO WATCHES, re-pair them.

If you are unable to establish a connection...

Use the procedure below to delete the pairing information from the watch, and then re-pair the watch and phone.

Num_circle_1 Hold down (D) for at least two seconds to enter the Timekeeping Mode.

Num_circle_2 Hold down (A) for at least two seconds until the name of the currently selected Home City is displayed.

Num_circle_3 Press (D) twice so the seconds digits are flashing.

Num_circle_4 Hold down (B) for at least 2 seconds. Release it when [CLR] stops flashing. This deletes the pairing information from the watch.

Num_circle_5 Press (A) to exit the setting screen.

Changing to a Different Phone Model

Q1Connecting the current watch to another phone.

Pair the watch with the phone.

Auto Time Adjustment by Bluetooth Connection (Time Adjustment)

Q1When does the watch adjust its time?

The watch will connect with the phone and perform auto time adjustment at around 12:30 a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The connection is automatically terminated after auto time adjustment is complete.

Q2Auto time adjustment is not performed at a scheduled time.

Is auto time adjustment not being performed according to its normal schedule?

Note that auto time adjustment is not performed for 24 hours after swapping of the Home Time and World Time, or after the time setting is adjusted manually on the watch. Auto time adjustment will resume 24 hours after either of the above operations is performed.

Is a stopwatch or timer operation being performed?

Auto time adjustment will not start at the scheduled times if a stopwatch or timer operation is in progress. Stop the stopwatch or timer operation.

Is auto time adjustment enabled?

Auto time adjustment will not be performed at the scheduled times unless it is enabled. Enable auto time adjustment.

Q3The watch does not show the correct time even after (C) is pressed.

The watch will not adjust its time if you press (C) while a stopwatch or timer operation is in progress. Stop the stopwatch or timer operation and then press (C) again.

Q4Time is not displayed correctly.

If your phone is unable to receive a signal because you are outside its service range or cannot connect to a network for some other reason, the watch may not display the correct time. If this happens, connect the phone to a network and then perform the time adjustment operation.

Alarms

Q1The alarm does not sound.

Is the watch’s battery charged?

Keep the watch exposed to light until it recharges sufficiently.

Is the alarm enabled?