Module No. 3568
Configuring Notification Sound Settings
You can use the procedure below to enable or disable the notification sound.
-
Enter the Timekeeping Mode.
-
Hold down (A) for at least two seconds.
-
Use (A) and (C) to move the pointer to [BEEP].
-
Press (B).
-
Use (A) and (C) to move the pointer to [NOTIFICATION].
-
Press (B).
-
Use (A) and (C) to select a notification sound ON/OFF setting.
-
Press (B) to complete the setting operation.
-
Press (D) twice to exit the setting screen.
This displays the Timekeeping Mode setting screen.
![3568_set_disp_caps](fig/3568_set_disp_caps_NHCXILqpsncruw.png)
[ALL ON] |
Enables sound for all notifications. |
[USER] |
Enables sound only for items specified by you. |
[ALL OFF] |
Disables sound for all notifications. |
Note
The configuration of [USER] notifications can be changed using G-SHOCK MOVE.
After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the BEEP (sound) setting screen will re-appear.
is displayed in the Timekeeping Mode while the notification tone is disabled.
Note
The watch exits the setting operation automatically after about two or three minutes of non-operation.