Module No. 3559
Timer
The timer counts down from a start time specified by you. A beeper sounds when the end of the countdown is reached.
Using a Timer
Your watch provides you with two different types of timers. Select the timer you want to suit your needs.
Repeat Timer
With the Repeat Timer, countdown stops and the start time setting appears when the end of the countdown is reached.
The Repeat Timer comes in handy when you need to perform the same countdown operation a number of times.
Auto Repeat Timer
With Auto Repeat Timer, the countdown operation is automatically restarted from the start time when the end of the countdown is reached. This continues until you stop the countdown operation.
Time Up Beeper
The watch beeps at various points in the countdown starting from five minutes before the end of a countdown.
You can disable the beep, if you want.
The watch beeps at the points shown in the table below while the beep is enabled.
Remaining time |
Beep |
5 minutes 10 seconds to 5 minutes |
Every second |
4 minutes to 1 minute |
Every minute |
30 seconds |
1 second |
10 seconds to 0 seconds (Time Up) |
Every second |
If the start time is under five minutes, the beep operations will be performed part way through the above sequence.
An alarm will sound for one second to let you know when the end of a countdown is reached.