Module No. 3554

Checking the Current Altitude

  1. Display the current time screen.

    2. Watch Mode

  2. Use (A) and (D) to select [ALTIMETER].

    3. 3554_ALTI

  3. Press (C).

    4. This displays the altitude for your current location.

    Each press of (A) or (D) toggles between the value display and graph display.

    Value Screen

    3515_067_2_ALTI

    Graph Screen

    3515_067_3_ALTI

    1. Current location altitude

    2. Differential between reference altitude and current altitude

    3. Altitude graph

      4. 3515_068_graph_ALTI

    The watch takes altitude readings every second for about the first three minutes. After that, it takes readings according to the watch’s auto measurement interval setting.

    Check the information at the link below to find out how to configure the auto measurement interval.

    Setting the Auto Measurement Interval

    To retrigger measurement, press (C).

    To return to the current time screen, hold down (E) for at least one second.

Note

Measurement range: -10,000 m to 10,000 m (-32,800 to 32,800 feet) (Measurement unit: 1 meter (5 feet))
Note that calibrating altitude readings will cause a change in the measurement range.

[- - - - -] appears for the measured value if it is outside the allowable range.

Back

Next