Module No. 3554

Setting a Start Time

The start time can be set in 1-second units up to 60 minutes.

To configure timer settings with the CASIO WATCHES phone app

If the watch is paired with a phone, you can also use the CASIO WATCHES phone app to set the timer start time.

To configure timer settings with the watch

EZ Settings

Use this procedure to change the timer start time setting in 30-second increments.

  1. Display the current time screen.

  2. Use (A) and (D) to select [TIMER].

  3. 3554_TMR_Mode
  4. Press (C).

  5. This displays the TIMER screen.

  6. Press (A) or (D).

  7. This returns to the EZ setting screen.

    3554_088_TMR
  8. Use (A) and (D) to change the timer start time setting.

  9. Each press of (A) changes the setting by -30 seconds, while (D) changes it by +30 seconds.

  10. Press (C).

  11. This starts the timer operation.

Minute and Seconds Setting

You can use the steps below to change the timer start time setting in one-second increments up to 60 minutes.

  1. Display the current time screen.

  2. Use (A) and (D) to select [TIMER].

  3. 3554_TMR_Mode
  4. Press (C).

  5. This displays the TIMER screen.

  6. Hold down (A) for at least two seconds.

  7. This causes a cursor to appear under the minutes setting.

  8. Use (A) and (D) to change the minutes setting.

  9. 3554_089_TMR
  10. Press (C).

  11. This moves the cursor to the seconds setting.

  12. Use (A) and (D) to change the seconds setting.

  13. 3554_090_TMR

    To return to the minute setting, press (E).

  14. Press (C) to complete the setting operation.

  15. After the setting operation is complete, a check mark appears for a few seconds, and then the TIMER screen re-appears.

Note

To exit the timer setting operation at any point, press (E).

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

Back

Next