Module No. 3554

Configuring Alarm Settings

Use the CASIO WATCHES phone app or watch operations to configure alarm settings.

To configure alarm settings with the CASIO WATCHES phone app

Check the connection

Make sure the BLE_mark symbol is shown on the watch display when you perform the procedure below. If BLE_mark is not displayed, refer to the information at the link below.

Connecting with a Phone Paired With the Watch

  1. phone-s Tap the “CASIO WATCHES” icon.

  2. phone-s Tap the “My Watch” tab.

  3. phone-s Select “GPR-H1000” and tap it.

  4. phone-s Select the setting you want to change and then perform the operation shown on the screen.

To configure alarm settings with the watch

  1. Display the current time screen.

    2. Watch Mode

  2. Hold down (A) for at least two seconds.

    3. This enters the Control Mode.

  3. Use (A) and (D) to select [SETTING].

    4. 3554_SETTING

  4. Press (C).

    5. This displays the setting menu screen.

    3554_Set_Menu_caps

  5. Use (A) and (D) to move the pointer to [WATCH SETTINGS].

  6. Press (C).

    7. This displays the watch setting screen.

  7. Use (A) and (D) to move the pointer to [ALARM].

  8. Press (C).

  9. Use (A) and (D) to move the pointer to the alarm you want to set.

    10. 3554_ALM_set

  10. Press (C).

  11. Use (A) and (D) to select an alarm and snooze function ON/OFF setting.

    12. [OFF]

    Disables alarm, disables snooze

    [ON]

    Enables alarm, disables snooze

    [ON (SNZ)]

    Enables alarm, enables snooze

    The currently selected setting is indicated by a check mark (icon_3475_Check_ALM) to the left.

    3554_083_ALM

  12. Press (C).

  13. Use (A) and (D) to set the alarm hour.

  14. Press (C).

  15. Use (A) and (D) to set the alarm minute.

  16. Press (C) to complete the setting operation.

    17. After the setting operation is complete, a check mark appears for a few seconds, and then the alarm selection screen re-appears.

    You can view the setting time of the alarm and whether the alarm setting and snooze setting are on or off.

  17. Hold down (E) for at least one second to return to the current time screen.

Note

If you want to exit the alarm setting operation at any time, press (E) several times to return to the watch setting screen.

To stop a sounding alarm

While an alarm sound and/or vibration operation is being performed, press any button to stop it.

Note

The watch performs a 10-second sound/vibration operation when a preset alarm time is reached.

When snooze is enabled for an alarm, alarm sound and/or vibration will repeat every five minutes, up to seven times. To stop an alarm’s ongoing snooze operation, turn off the alarm.

If you do not perform any operation for two or three minutes while the setting screen is displayed, the watch automatically returns to the current time screen.

Back

Next