Module No. 3540

Configuring Power Saving Function Settings

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Hold down (A) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.

    3. 3543_fl_HT_SET_comon

  3. Press (C) 14 times.

    4. This displays [POWER SAVING].

    3539_45_Other

  4. Press (D) to toggle between on and off.

    5. [On]: Power Saving enabled.

    [OFF]: Power Saving disabled.

  5. Press (A) to exit the setting screen.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

For details about Power Saving, refer to the information below.

Power Saving Function

Back

Next