Module No. 3539

World Time City Setting

You can specify up to five cities as your World Time favorites. If you are in an area that observes summer time, you can also enable or disable summer time.

Note

The initial factory default summer time setting for all cities is [AUTO]. In many cases, the [AUTO] setting lets you use the watch without switching between summer time and standard time.

  1. Enter the World Time Mode.

    2. Navigating Between Modes

  2. Use (D) to display the World Time number whose setting you want to configure.

    3. 3539_21_WT

  3. Hold down (A) for at least two seconds.

    4. This causes [WT] to flash on the display.

    3539_22_WT

  4. Use (B) and (D) to display the city you want to specify as a World Time City.

    5. Holding down (B) or (D) scrolls through settings at high speed.

  5. If you want to change the summer time setting, press (C).

  6. Use (D) to select a summer time setting.

    7. [AUTO]
    The watch switches between standard time and summer time automatically.

    [OFF]
    The watch always indicates standard time.

    [ON]
    The watch always indicates summer time.

    3539_23_WT

  7. Press (A) to complete the setting operation.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

While [UTC] is selected as the city, you will not be able to change or check the summer time setting.

If you select a World Time City with the CASIO WATCHES phone app and then change to a different city with a watch operation, the CASIO WATCHES city information is deleted from the watch.

Configuring World Time Settings

Back

Next