Module No. 3516

Resetting Watch Settings

This section explains how to return the watch time, date, and other settings, as well as the log to their initial factory defaults.

Important!

Once you perform a reset operation, you cannot restore pre-reset settings.

Reset the watch settings is not possible under the conditions described below.

While the battery level indicator is 3516_icon_inl_LOW or lower

  1. Display the current time screen.

  2. Hold down (C) for at least two seconds.

  3. This enters the Control Mode.

  4. Use (C) to select [SETTING].

  5. 3516_SETTING
  6. Press (A).

  7. This displays the setting menu screen.

    3516_Set_Menu_caps
  8. Use (C) to move the pointer to [GENERAL SETTINGS].

  9. Press (A).

  10. This displays the GENERAL SETTINGS screen.

  11. Use (C) to move the pointer to [RESET].

  12. Press (A).

  13. Use (C) to move the pointer to [YES].

  14. To stop the reset operation, move the pointer to [NO].

  15. Press (A).

  16. After the reset operation is complete, the watch will return to the current time screen. The reset operation is complete when [AC] appears in the lower right corner of the display.

  17. Press (A) to clear [AC] from the display.

Note

Resetting the watch will also delete information for pairing the watch with a phone, and unpair them.

Back

Next