Module No. 3515

Configuring World Time Settings

Perform the required operations with the CASIO WATCHES phone app or the watch to configure world time settings.

To configure World Time settings with the CASIO WATCHES phone app

Specifying a World Time City with the CASIO WATCHES phone app causes the watch’s World Time City to change accordingly. Settings can be configured to perform auto summer time switching for the World Time City.

Check the connection

Make sure the BLE_mark symbol is shown on the watch display when you perform the procedure below. If BLE_mark is not displayed, refer to the information at the link below.

Note

The CASIO WATCHES phone app World Time lets you select from among approximately 300 cities as the World Time City.

To select a World Time City

  1. phone-s Tap the “CASIO WATCHES” icon.

  2. phone-s Tap the “My Watch” tab.

  3. phone-s Select “GBD-H2000” and tap it.

  4. phone-s Select the setting you want to change and then perform the operation shown on the screen.

Note

You can use the CASIO WATCHES phone app to configure settings for user cities that are not included in the watch’s built-in World Time Cities. You must use the CASIO WATCHES phone app to select a user city as your World Time City.

Configuring the Summer Time Setting

  1. phone-s Tap the “CASIO WATCHES” icon.

  2. phone-s Tap the “My Watch” tab.

  3. phone-s Select “GBD-H2000” and tap it.

  4. phone-s Select the setting you want to change and then perform the operation shown on the screen.

  5. “AUTO”
    The watch switches between standard time and summer time automatically.

    “OFF”
    The watch always indicates standard time.

    “ON”
    The watch always indicates summer time.

Note

While the summer time setting is “AUTO”, the watch switches between standard time and summer time automatically. You do not need to switch between standard time and summer time manually. Even if you are in an area that does not observe summer time, you can leave the watch’s summer time setting as “AUTO”.

For information about summer time periods, refer to the “Summer Time Table”.

Configuring World Time Settings with the Watch

Perform the required operations on the watch to select a World Time City and to configure summer time settings for your World Time City.

To select a World Time City

  1. Display the current time screen.

  2. Use (A) and (D) to select [WORLD TIME].

  3. 3515_WT_Mode
  4. Press (C).

  5. This displays the current World Time City and the current time there.

    3515_079_WT
  6. Hold down (A) for at least two seconds.

  7. This displays the World Time setting screen.

    While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

    3515_WT_set
  8. Use (A) and (D) to move the pointer to [WORLD TIME CITY].

  9. Press (C).

  10. This displays a menu of World Time Cities.

    3515_080_WT
  11. Use (A) and (D) to move the pointer to the city you want to use.

  12. Press (C) to complete the setting operation.

  13. After the setting operation is complete, a check mark appears for a few seconds, and then the World Time setting screen re-appears.

  14. Press (E) to exit the setting screen.

  15. This displays the current time and date in the selected city.

    3515_082_WT

Note

If you select a World Time City with the CASIO WATCHES phone app and then change to a different city with a watch operation, the CASIO WATCHES city information is deleted from the watch.

Configuring Summer Time Settings

  1. Display the current time screen.

  2. Use (A) and (D) to select [WORLD TIME].

  3. 3515_WT_Mode
  4. Press (C).

  5. This displays the current World Time City and the current time there.

  6. Hold down (A) for at least two seconds.

  7. This displays the World Time setting screen.

    While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

    3515_WT_set
  8. Use (A) and (D) to move the pointer to [DST].

  9. Press (C).

  10. Use (A) and (D) to select a summer time setting.

  11. [AUTO]

    The watch switches between standard time and summer time automatically.

    [OFF]

    The watch always indicates standard time.

    [ON]

    The watch always indicates summer time.

  12. Press (C) to complete the setting operation.

  13. After the setting operation is complete, a check mark appears for a few seconds, and then the World Time setting screen re-appears.

  14. Press (E) to exit the setting screen.

Note

The initial factory default summer time setting for all cities is [AUTO]. In many cases, [AUTO] lets you use the watch without switching manually between summer time and standard time.

While [UTC] is selected as the city, you will not be able to change or check the summer time setting.

Back

Next