Module No. 3515

Configuring Smart Alarm Settings

Use the CASIO WATCHES phone app or watch operations to configure smart alarm settings.

To configure smart alarm settings with the CASIO WATCHES phone app

Check the connection

Make sure the BLE_mark symbol is shown on the watch display when you perform the procedure below. If BLE_mark is not displayed, refer to the information at the link below.

  1. phone-s Tap the “CASIO WATCHES” icon.

  2. phone-s Tap the “My Watch” tab.

  3. phone-s Select “GBD-H2000” and tap it.

  4. phone-s Select the setting you want to change and then perform the operation shown on the screen.

To configure smart alarm settings with the watch

  1. Display the current time screen.

  2. Hold down (A) for at least two seconds.

  3. This enters the Control Mode.

  4. Use (A) and (D) to select [SETTING].

  5. 3515_SETTING
  6. Press (C).

  7. This displays the setting menu screen.

    3515_Set_Menu_caps
  8. Use (A) and (D) to move the pointer to [WATCH SETTINGS].

  9. Press (C).

  10. This displays the watch setting screen.

  11. Use (A) and (D) to move the pointer to [SMART ALARM].

  12. Press (C).

  13. Use (A) and (D) to select the smart alarm and snooze function ON/OFF setting you want.

  14. [OFF]

    Disables smart alarm, disables snooze

    [ON]

    Enables smart alarm, disables snooze

    [ON (SNZ)]

    Enables smart alarm, enables snooze

    The snooze function on/off setting you configure is for the smart alarm only.

    The currently selected setting is indicated by a check mark (icon_3475_Check_ALM) to the left.

    3515_056_Smart_ALM
  15. Press (C).

  16. Use (A) and (D) to set the alarm time hour.

  17. 3515_057_Smart_ALM
  18. Press (C).

  19. This causes the cursor to move to the minute setting of the time.

  20. Use (A) and (D) to set the alarm time minute.

  21. 3515_058_Smart_ALM
  22. Press (C).

  23. This moves the cursor to the smart period setting.

    A smart alarm sounds when the watch determines you are lightly asleep during the smart period.

  24. Use (A) and (D) to specify a smart period setting.

  25. [15]

    From 15 minutes before alarm time, to alarm time

    [30]

    From 30 minutes before alarm time, to alarm time

    [45]

    From 45 minutes before alarm time, to alarm time

    [60]

    From 60 minutes before alarm time, to alarm time

    The currently selected setting is indicated by a check mark (icon_3475_Check_ALM) to the left.

    3515_059_Smart_ALM

    Note

    The shorter the smart time period, the higher the probability that the alarm will sound at the alarm time.

  26. Press (C) to complete the setting operation.

  27. After the setting operation is complete, a check mark appears for a few seconds, and then the watch setting screen re-appears.

    You can view the setting time of the smart alarm and whether the smart alarm setting and snooze setting are on or off.

  28. Hold down (E) for at least one second to return to the current time screen.

Note

If you do not perform any operation for two or three minutes while the smart alarm setting screen is displayed, the watch automatically returns to the current time screen.

Back

Next