Module No. 3495

Manual Time Calibration Signal Receive

  1. Place the watch near a window or some other location appropriate for time signal reception.

  2. Enter the Timekeeping Mode.

    3. Navigating Between Modes

  3. Hold down (D) for at least two seconds until [RCVD] flashes.

    4. This indicates that the receive operation has started. After the receive operation is complete, the watch’s time and day settings will be adjusted accordingly.

    3495_RCVDmark

    The level indicator shows the signal level ([L1], [L2], [L3]) while a receive operation is in progress.

    Receive Level Indicator

Note

The receive operation typically takes anywhere from about three minutes to about eight minutes. It can take as long as 16 minutes.

Time calibration signal reception is better at night than during the day.

A time calibration signal cannot be received while the city selected as your Home City is one that does not support signal reception.

Back

Next