Module No. 5719

While the watch is connected to a phone, it will automatically correct its day and time settings to those of the phone. If the watch is not connected to a phone, use the procedure below to adjust its day and time settings.

1. Pull out the crown to the second click.

This causes the second hand to move to “A” of the watch’s current time setting is a.m., or “P” if it is p.m., and enables the hour and minute setting operation.



2. Rotate the crown to adjust the hour and minute settings.

Adjusting the time in the Timekeeping Mode also causes the Dual Time setting to change. Crown operation is disabled while the small hour and minute hands are moving.

3. Press (A).

This enables the month and day setting operation.

4. Press (B) to change the month.



5. Rotate the crown to change the day.

6. Press (A).

This enables the year 10’s digit setting operation.

7. Rotate the crown to change the year 10’s digit.



8. Press (A).

This enables the year one’s digit setting operation.

9. Rotate the crown to change the year one’s digit.



10. On a time signal at the top of a minute, push the crown back in.