Module No. 5713

Specifying the Altitude Measurement Unit

You can select either meters (m) or feet (ft) as the Altimeter Mode display unit.

Important!

When Tokyo (TYO) is set as the Home City, the altitude unit is fixed as meters (m) and cannot be changed.

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Loosen the crown and then pull it out.

    3. The currently selected Home City will appear on the display.

    5713_HT_SET_NY

  3. Press (B) seven times.

    4. This causes [UNIT] to appear, with [m] or [ft] flashing.

    5713_61_ALTI

  4. Rotate the crown to select an altitude unit.

    5. [m]: Meters

    [ft]: Feet

    5713_62_disp_ALTI

  5. Push the crown back in and then lock it.

Note

If you do not perform any operation for about two minutes after pulling out the crown, crown operations will automatically become disabled. If that happens, push the crown back in and then pull it out again.

Back

Next