Module No. 5713

1. The function hand indicates the altitude or barometric pressure difference.

2. The function hand indicates the current charge level after you enter the Timekeeping Mode.

3. The bearing hand indicates the bearing to a destination (in Bearing Memory) or to a location you recorded (in Location Memory).

4. When the watch is connected with a phone, the second hand points to the mark next to .

5. While the watch is standing by for connection with a phone, the second hand points to the mark next to [RC].

6. Displayed when an alarm is turned on.

7. Appears when the hourly time signal is on.

8. Displayed when the indicated time is summer time.

9. Displayed while barometric pressure change indication is enabled.

10. Shows the barometric pressure measurement unit.

11. Flashes while the watch’s hands are shifted for easier reading.

12. Displayed while Mission Log is enabled.

13. Displayed after time adjustment using time signal reception or connection with a phone was successful.

The [RCVD] indicator will disappear in the cases below.

After you use watch operations to change Home City settings (time and date, city, summer time)

After the watch switches between standard time and summer time

After a time signal receive operation fails

After a phone-based time adjustment operation fails