Module No. 5708

Using the Watch in a Medical Facility or Aircraft

When you are in a hospital, on an aircraft, or in any other location where radio signals may cause problems, you can perform the procedure below to disconnect the watch from your phone so they can’t communicate with each other (Airplane Mode). Use the same procedure when you want to disable the Airplane Mode.

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Hold down (B) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.

    3. This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators.

    5708_fl_SET_HT_caps

  3. Press (C) 15 times.

    4. This displays [icon_dot_airplane].

    5708_24_ATDS

  4. Press (D) to toggle between the Airplane Mode settings.

    5. [ON]: Airplane Mode enabled.

    [OFF]: Airplane Mode disabled.

  5. Press (B) to complete the setting operation.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

Back

Next