Module No. 5702

Configuring the Summer Time Setting (Dual Time)

The watch’s current time setting can be changed to summer time when required.

[STD]: The watch always indicates standard time.

[DST]: The watch always indicates summer time.

Important!

When the time zone for your Dual Time is a region where time calibration signal reception is possible, you will be able to select [AT] (auto) for the daylight saving time setting. However, in order to have the Dual Time switch to daylight saving time, you need to swap it with your Home City time and then perform a time calibration signal receive operation.

For information about areas where time calibration signals can be received, see the information below.

  1. Enter the Calendar Mode.

  2. Loosen the crown and then pull it out to the first click.

  3. The second hand will point to the currently selected time zone.

    The mode hand will point to the summer time setting of the Dual Time.

    5702_29_DT
  4. Hold down (B) for at least one second.

  5. Each time you hold down (B) for at least one second, the summer time setting will cycle to the next available option.

    5702_30_DT
  6. Push the crown back in and then lock it.

Note

While [UTC] is selected as the city, you will not be able to change or check the summer time setting.

Back

Next