Module No. 5702
Auto Time Adjustment
Your watch can connect with your phone to adjust the watch’s time setting.
If you leave the watch in the Calendar Mode, it will perform the adjustment operation automatically as you go about your daily life (as shown in the illustration), without any operation required by you.
Important!
The watch may not be able to perform auto time adjustment under the conditions described below.
While the watch is too far away from its paired phone
While communication is not possible due to radio interference, etc.
While the phone is updating its system
While the CASIO WATCHES phone app is not running on the phone
While the watch is in a power saving state following approximately one hour of non-use
Note
If the watch does not indicate the correct time even if it is able to connect with a phone, adjust the hand and day indicator positions.
If there is a World Time City specified with the CASIO WATCHES phone app, its time will also be adjusted automatically.
Auto time adjustment is performed at the times described below.
After your phone’s time zone or summer time setting is changed
After 24 hours or more have passed since the last time adjustment using Bluetooth connection
After 24 hours or more have passed since city swapping using CASIO WATCHES or watch operation
After 24 hours or more have passed since the last home city change or time adjustment using watch operation
Watch operation can be performed even while it is connected with your phone.
Triggering Immediate Time Adjustment
The watch’s time setting will be adjusted automatically whenever you establish a connection between the watch and a phone. Whenever you want to trigger immediate time adjustment, perform the procedure below to connect with a phone.
-
Move the phone close to (within one meter of) the watch.
-
Enter the Calendar Mode. -
Hold down (D) for at least 0.5 seconds until the second hand points to [C]. Release the button as soon as the second hand points to [C].
When the watch connects with a phone, the second hand will normally move to [Y(YES)] and then the watch’s time setting will be adjusted.
